Search By Categories

Grizzly Locker
Scratch and Dent
< Back to Home Page
RANDYS Worldwide Automotive
USA Standard Gear Limited Warranty
USA Standard Gear® (“USA Standard”) warrants the original retail purchaser that all USA Standard products will be free from defects in materials and workmanship for the periods shown herein. USA Standard makes no other warranty of any kind, express or implied. All other warranties, including but not limited to an implied warranty of merchantability or fitness for a particular purpose, are excluded. This warranty is offered provided that the USA Standard product has been installed and maintained in accordance with USA Standard instructions, and that it has not been subject to modification, accident, abnormal use or misuse. At USA Standard’s discretion, this warranty may be voided if installation of USA Standard product(s) occurs on vehicles with tires that exceed USA Standard Maximum Recommended Tire Size.


Upon notification of a warranty claim, USA Standard shall investigate the claim of defect, and, in the event of a verified defect, shall, at their sole choice, either repair the defective product or replace it.


This warranty does not cover, and USA Standard shall not be liable for, incidental or consequential damages, including loss of time, road service charges, labor charges, inconvenience, loss of vehicle use, loss of revenues, or loss or damage to personal property (including loss or damage to vehicle parts due to the failure of the USA Standard product). In addition, this warranty does not cover, and USA Standard shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling USA Standard Gear® products, except where such agreements are within the provisions of this Warranty statement. Also, this warranty does not cover damage to the axle caused by or facilitated by failure of a non-USA Standard component.


This agreement offers you specific legal rights. You may also have other rights which vary from state to state.
USA STANDARD MAXIMUM RECOMMENDED TIRE SIZE
Chrysler 8.25 33 Inches
Dana 30 33 Inches
Dana M35 33 Inches
Dana M20 35 Inches
Dana 44 35 Inches
Ford 8.8 35 Inches
GM 8.5 35 Inches
Toyota 8 35 Inches

USA STANDARD GEAR® WARRANTY BY PRODUCT
Spool As long as original purchaser owns vehicle in which Spool is originally installed It is normal for Spools to cause tire chatter, squeal, or scrubbing when vehicle is not moving in a straight line. Both rear tires must measure the same height from ground to top of wheel for Spool to function properly without premature wear.
Rear Axle (1541H) Five (5) Years Covers parts for five years against manufacturing defects.
Front Axle (Series ZA W) Five (5) Years Five year warranty covering manufacturing defects and axle breakage. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however, Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. USA Standard Gear (through RANDYS Worldwide Automotive) makes final determination on warranty considerations.
Ring & Pinion Gear Set One (1) Year Warrantied against manufacturing defects for one (1) year.
Positraction Differential One (1) Year Exclusions apply, does not cover premature clutch wear or abuse. It is normal for Positraction differentials to cause tire chatter, squeal, or scrubbing when vehicle is not moving in a straight line. Both rear tires must measure the same height from ground to top of wheel for differential to function properly without premature wear. Limited slip additive or appropriate friction modifier must be used with oil to reduce Positraction chatter.
Spartan Locker One (1) Year Warrantied against manufacturers defects for one (1) year.
Install Kits One (1) Year Includes ZBK, ZPK, and ZK. Covers parts for one year against manufacturing defects.
Spider Gear Kits (ZIK) One (1) Year One year against manufacturing defects. Exclusions apply, does not cover clutch wear in limited slip differentials.